Aluminium Tripolyphosphate Anticorrosive and Rustproof Pigment
Aluminium Tripolyphosphate Anticorrosive and Rustproof Pigment
Aluminium Tripolyphosphate Anticorrosive and Rustproof Pigment - High-quality factory manufacturing exceptional protective coatings for industries. Explore more!
Note: The SEO description is limited to 160 characters which means it should be concise and to-the-point.
This coloring pigment is able to widely substitute conventional toxic antirust pigments such aslead red and zinc chrome yellow in the production of various prime coats and combined coating materials.With good compatibility with varnish paints, it can be used together with various coloring pigments,filing agents and antirust pigmentsin the production of high performance anti-corrosion coating materials.Specifically it is applicable to the production ofdissolvent type of coating materials such as formaldehyde phenol resin,alkide resin,epoxy resin,epoxy polyester andacrylic resin as well as water-soluble epoxy ester dipping paint. Besides,it is also applicable to the preparation of highbuild paint, powder coating,organic titanium anti-corrosion coating,on-rust paint,bituminous paint, zinc-rich primer,fire-retardant coating,heat-resistant paint,etc.
SPECIALITY
Modified Aluminum Tripolyphosphate is suitable for production of water paint while Aluminum Tripolyphosphate is suitable for oil paint. Aluminum Dihydrogen Tripolyphosphate can also be used as a curing agent forSodium silicate.
Product intro
Aluminum tripolyphosphate series are ideal replacement products for toxic rust-proof materials such as lead and chromium. The anti-rust performance of this product is better than red lead, zinc chrome yellow and other anti-rust pigments. The pigment is widely used in various primers and paints with a combination of the bottom surface, and has good affinity with varnishes. It can be used in combination with various pigments and fillers, and can also be used in combination with various anti-rust pigments to prepare various high-performance Anti-corrosion paint. Suitable for solvent-based coatings such as alkyd resins, epoxy resins, epoxy polyesters, acrylic resins, and various water-based resin coatings; it can also be applied to high-build coatings, powder coatings, organic titanium anti-corrosion coatings, rusty coatings and Asphalt paint, zinc-rich primer, fire-resistant paint, heat-resistant paint, etc.
Product type
Aluminium tripolyphosphate
Chemical & physical index
Test items
Aluminium tripolyphosphate
Aluminum Dihydrogen Tripolyphosphate
Modified aluminumtripolyphosphate
Modified aluminumtripolyphosphate(EPMC-Il)
Whiteness%
85-90
≥90
85-90
≥93
P2O5%
30-40
60-70
35-40
48-52
Al2O3%
15-25
20-30
13-20
11-14
SiO2%
10-15
--
10-15
--
Zno%
--
--
15-25
18-22
PH Value
6-7
3-5
6-7
6-7
45um residue on sieve%
≤0.5
≤0.5
≤0.5
≤0.1
Loss on ignition(600℃)%
8-12
8-12
8-12
8-12
Pb %
--
--
--
≤0.01
Cd %
--
--
--
≤0.005
Enterprise Standard
Q/130184XS-2020
Product performance & application
►Tripolyphosphate radical can be generated chelate with all kinds of metal ions, formed in the coated surfaces of the purification of membrane, have a strong inhibition effect of corrosion of steel and light metal, after coating, its rust corrosion isolation have passivation remarkable effect, as antirust ability can be improved 1-2 times of red lead and its series and part of chrome antirust pigment. ►In the coating formulation with less usage amount, low unit cost, compare with using red lead and zinc chrome yellow, dosage can reduce more than 10- 20%, if it reasonable use in coating system, it can substitute about 20-40% for titanium dioxide, about 40-60% for zinc powder, reduce the cost of production around 20-40%. ►t can significantly improve the coating performance, enhance the property about 20-40% of whiteness tenacity, condense, glossiness, weather resistance, moisture-proof, sun resistance, dirt resistance and acidity resistance. ► Product performance standards: China Q/130184XS-2020 standard.
Transport & storage
In order to avoid weathering, it should be stored in a dry place while avoiding drastic changes in temperature. Products that have been packaged should be closed to prevent moisture absorption and pollution
Packing
25kgs/bag or 1ton/bag, 18-20tons/20’FCL. FAQ 1.What is about your company strength? We have over 30 years of experience in the chemical industry since 1993 Main production of antirust pigment high temperature pigment binder and other products have excellent technical experience 2.What is the MOQ of your product? We can supply any quantity you need for the first time for samples or trial orders so pls just tell us the real quantity you need. 3.How could we know whether your quality could meet our requirements or not? If you could provide us your spec,our technician will check whether our quality could meet your requirements or customize it for you.. And the third party inspection is acceptableAt lastwe could recommend you some of our customers who use the same chemicals. 4.Can we get free samples before orders? According to different values of our products,the samples could be for freebut it is not for all. 5.Could we use our DHL/FEDEX/TNT ACCOUNT to ship the samples? We are sorry to tell you that we can just use our professional shipping forwarders to ship qoods of small quantities.Because chemical products belong to special cargos,no matter it is dangerous chemical or not. 6.What payment terms are acceptable? TT,LC at sight 7.What is about the delivery time? The goods of small quantity will be sent out in 3 working days.For bulk cargowe will book the cargo space once the order is confirmed